HP 982 - Manual (Page 6)

6
Installation and Operation
Econo-Mizer
INSTALLATION
Use Tables A & B to determine the proper size of fuse protection and the length and size
of wiring required. Portable extension cords, if used, should be as short as possible to
minimize voltage drop. Cords that are too long, or cords that are made of inadequate wire
gauge, can cause the motor to fail.
MOTOR 25 FT 50 FT 100 FT 200 FT
982 (1/3 hp-115V) #18 GA #16 GA #12 GA #10 GA
986 (1 HP-230V) #14 GA #14 GA #12 GA #10 GA
996 (1-1/2 hp-220V) #14 GA #14 GA #12 GA #10 GA
MOTOR
982 (1/3 hp-115V)
986 (1 HP-230V)
996 (1-1/2 hp-220V)
DUAL ELEMENT TIME DELAY
12
12
15
NON-TIME DELAY
15
15
20
DISTANCE
TABLE A (WIRE SIZE)
TABLE B (FUSE SIZE)
TYPE OF FUSE