Henny Penny PFE-561 - Manual (Page 2)

© 200 8 Henny Penny Corporation, Eaton, OH 45320 USA Revised 09/17/08
Laboratory certifications
Continuing product improvement may subject specifications to change without notice.
PROJECT ITEM NO
www.hennypenny.com
19 1/8 in. (486 mm) 38 7/8 in. (968 mm)
Capacity
Product
18 lbs. (8.2 kg)
Oil 69 lbs. (32.2 l)
Electrical
FRONT
PLAN
Dimensions
Height: 48 in. (1219 mm)
Width: 19 1/8 in. (486 mm)
Depth: 38 7/8 in. (968 mm)
Required clearances
Top:
16 in. (400 mm) for lid up
Sides: 6 in. (152 mm) air flow
Back: 6 in. (152 mm) air flow
Front: 30 in. (762 mm) filter pan removal
Crated dimensions
Length: 44 ½ in. (1130 mm)
Depth: 21 ¾ in. (550 mm)
Height: 56 in. (1420 mm)
Volume: 31.4 cu. ft. (0.88 m³)
Net weight N/A
Crated weight: 325 lbs. (148 kg)
Pressure
Operating pressure:
12 psi.
Safety valve setting: 14.5 psi.
Heating
(3) immersed elements
3750W each (11250W total)
Pressure fryers
48 in.
(1219 mm)
MODEL
PFE-561
Electric
Volts Phase Cycle/Hz Watts Amps Wire Plug
190-208 3 50 or 60 11250 32.0 3+G
208 3 60 11250 32.0 3+G
220-240 3 50 or 60 11250 30.0 3+G
220/380 3 50 or 60 11250 18.5 4+G
240/415 3 50 or 60 11250 16.1 4+G
480 3 60 11250 14.0 3+G
NOTE: USA 208V or 220-240V units include cord, 90° angle plug, and receptacle
OR cord, straight plug, and receptacle OR cord and straight plug OR no cord,
plug, or receptacle.
Canada 208V units include cord, plug and receptacle.
G
X
Z
Y
NEMA 15-50 P
USA 208V
220-240V
G
Z
Y
X
NEMA 15-60 P
CAN 208V
Bidding Specifications
• Provide Henny Penny Model PFE-561
electric pressure fryer, 18 lbs. (8.2 kg)
capacity per load and built-in filtration
system (additional charge.)
• Units shall incorporate either
COMPUTRON ™ 1000 simple digital controls
or COMPUTRON ™ 8000 control system
(additional charge.)
• Materials—cabinet, deck, exhaust stack,
spindle, locking mechanism, filter drain pan
and various fittings are stainless steel. Fry
pot is heavy duty stainless steel. Lid is
aluminum alloy.
• Color-keyed locking spindle and lid-lock
mechanism engage pressure seal to create 9
psi pressure in cooking chamber.
• Three low-wattage electric elements encircle
the inside of the fry pot part-way up the side,
and are not located on the bottom or below
the pot. This design produces a “cold zone”
that extends suitable oil life.
• Unit’s controller provides for programmable or
manual operation with press-key controls and
LED digital display. COMPUTRON
™ 8000
control offers idle and melt modes, load
compensation, filtration tracking and 7-day
history.
• Units will include four heavy-duty casters, two
locking.
• Units will be shipped with starter kit of choice
of filtering media.
Electric power