Huawei V200R001 - Manual (Page 13)

User Manual - Configuration Guide (Volume 3)
Versatile Routing Platform
Chapter 2
Configuration of Modem Management
2-7
II. Networking diagram
Modem
PC
PSTN
Modem Quidway Router
Connection available from all
asynchronous interface
Figure DC-2-2 Networking diagram of remote configuration using modem and through asynchronous
interface
III. Configuration procedure
Quidway(config)# interface serial 0
Quidway(config-if-Serial0)# physical asynchronous
Quidway(config-if-Serial0)# modem inout
Quidway(config-if-Serial0)# async mode interactive
2.4.3 Router Initialization with Initialization Script
I. Configuration requirements
Enable the router to initialize the modem connected with asynchronous interface during
power on or restart.
II. Configuration procedure
Quidway(config)# chat-script init "" AT OK AT&B1&C1&D2&S0=1 OK AT&W OK
Quidway(config)# interface serial 0
Quidway(config-if-Serial0)# physical asynchronous
Quidway(config-if-Serial0)# modem
Quidway(config-if-Serial0)# script startup init
2.4.4 Direct Dial with Script
Configuration procedure:
Quidway(config)# chat-script dial "" AT OK ATDT8810058 CONNECT
Quidway(config)# interface serial 0
Quidway(config-if-Serial0)# physical asynchronous