Honeywell Electronic Programmable Thermostat - Manual (Page 6)

69-0862—2 6
IMPORTANT
Batteries are required for operation and
programming. When inserting batteries,
set the system switch to OFF. Remove
the battery door (on the thermostat left
side) using a coin at the bottom. See
Maintaining Your Thermostat section.
SET CURRENT TIME/DAY
To set the time, press and release the Set
Clock/Day key once. Press the Time keys until
the current time shows.
To set the day, press and release the Set
Clock/Day key again. Press the Time keys until
the current day shows. Press the Run Program
key.
HEATING PROGRAM
With the system switch at HEAT, press and
release the Set Schedule key once. WAKE,
Mon-Fri, and SET appear on the display.
Use Time keys to program WAKE time and
Temp keys to program WAKE temperature for
Mon-Fri. Repeat sequence for LEAVE, RE-
TURN, and SLEEP.
M8473
Auto On Fan Cool Off Heat System
TU
AM
LEAVE
USE TO
SET CURRENT
DAY AND TIME
USE TO SET
PROGRAM PERIOD
USE TO SET
TIME LATER
USE TO
SET COOLER
TEMPERATURE
USE TO SET
WARMER TEMPERATURE
LCD DISPLAY
USE TO SET
TIME EARLIER
RUN
PROGRAM
KEY
HOLD
TEMP
KEY