Home Automation 62A00-1 - Manual (Page 4)

4 www.homeauto.com
POWER AMPLIFIER
(OPTIONAL)
• Remote Input Module - allows any
source from anywhere in the house to
be listened to in any or all zones. It also
has an IR emitter port for routed IR
commands from the VSC.
• Use CAT-5 cable from the RIM to Remote
Audio In on the Hi-Fi.
• Maximum of six RIM's.
• Volume-Source Control - control
volume and select source, in addition
to adjusting bass, treble, balance, and
source gain. It also has an infrared
receiver.
• Use CAT-5 cable from the VSC to Zone
Control In on the Hi-Fi.
• Maximum of eight VSC's
TO SERIAL PORT ON HAI
CONTROLLER
Connect to HAI controller to select
zone and source, and control
volume and power from an
OmniTouch Touchscreen or via
controller program.
Hi-Fi has 2 variable
outputs (Zone 1 and Zone
8) that allow you to deliver
more power to the zone
speakers through optional
power amplifiers.
Use 16 gauge
speaker wire (4
conductor stranded is
suggested for neat
installation)
One 62A07-1 Power Supply is used to
power Zones 1-4. A second 62A07-1
Power Supply is used to power Zones 5-8.
POWER SUPPLY
HAI Part Number: 62A07-1
Universal Power Supply for Hi-Fi
For Zones 1-4
(Supplied with 4 Zone, 4 Source Kit)
POWER SUPPLY
HAI Part Number: 62A07-1
Universal Power Supply for Hi-Fi
For Zones 5-8
(Supplied with Hi-Fi Expansion Kit)
HAI CONTROLLER
(OPTIONAL)
RIM VSC
Zone 1
(Speakers)
Zone 2
(Speakers)
Zone 3
(Speakers)
SPEAKERS
(up to 8 Zones)
IR OUT
AUDIO IN
Hi-Fi RIM Remote Input Module
RIM
VOLUME
PUSH TO SELECT
VSC
IR OUT
AUDIO IN
Hi-Fi RIM Remote Input Module
RIM
VOLUME
PUSH TO SELECT
VSC