HP 3550 User Manual
Page 136
Advertising
NOTE
After replacing the fuser, you must also replace the pickup roller. See
for instructions.
To replace the pickup roller
NOTE
The printer should still be turned off.
1. Remove Tray 2 and place it on a flat surface.
2. Use one finger to push on the blue side of the pickup roller until the peg comes out of
the right hole.
3. Pull down gently on the pickup roller to remove the left peg of the pickup roller from the
printer.
124
Chapter 7 Maintenance
ENWW
Advertising
This manual is related to the following products: