HP 3550 - Manual (Page 54)

To disable or enable PowerSave
1. Press M
ENU
to enter the MENUS.
2. Press to highlight Configure Device.
3. Press to select Configure Device.
4. Press to highlight RESETS.
5. Press to select RESETS.
6. Press to highlight POWERSAVE.
7. Press to select POWERSAVE.
8. Press or to select ON or OFF.
9. Press to set the selection.
10. Press M
ENU
.
Display brightness
You can change the brightness of the control panel display using the DISPLAY
BRIGHTNESS option.
To set the display brightness
1. Press M
ENU
to enter the MENUS.
2. Press to highlight Configure Device.
3. Press to select Configure Device.
4. Press to highlight SYSTEM SETUP.
5. Press to select SYSTEM SETUP.
6. Press to highlight DISPLAY BRIGHTNESS.
7. Press to select DISPLAY BRIGHTNESS.
8. Press or to select the appropriate setting.
9. Press to set the selection.
10. Press M
ENU
.
Personality (available for the HP Color LaserJet 3700 series
printer)
This printer features automatic personality (printer language) switching.
● AUTO configures the printer to automatically detect the type of print job and configure its
personality to accommodate that job.
● PCL configures the printer to use Printer Control Language.
● PS configures the printer to use PostScript emulation.
42 Chapter 2 Control panel ENWW