Hamilton Beach 14885C - Manual (Page 4)

7
Power On Light
Models that do not have the automatic
shutoff and the reset button, do have a
power light. This light comes on when
the iron is plugged in. The light will
remain on even if the Temperature
Control is turned to OFF ( O ). The light
will stay on until iron is unplugged.
Features (continued)
Auto Shutoff Status Indicator and
Reset Button
If the iron is an Automatic Shutoff
model, the light comes on when the
iron is first plugged in. After 1 hour the
iron will shutoff and the light will go out.
Push the Reset Button to turn the iron
back on for another hour of ironing.
6
Features (on selected models)
Automatic Steam
Provides the correct amount of steam
for the fabric selected. Set Temperature
Control to the number that matches the
number on the Fabric Setting Chart.
Blast of Steam and Spray Buttons
Push Blast of Steam Button for an extra
blast of steam. Push Spray Button to
release a fine spray of water for difficult
wrinkles in cotton or linen.
Spray Steam
Vertical Steam
1. Follow Steps 1 through 3 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches away from
garment and press and release the Blast Button to steam
out wrinkles. Do not press Blast Button more than once
every 2 seconds.
4. To turn iron off, turn Temperature Control to OFF (O).
Unplug iron.
5. Empty water from the iron following directions in “Caring
for Your Iron.”
NOTE: Do not allow hot soleplate to touch delicate garments.
Auto Shutoff
Status
Indicator
Power
On Light
Reset
Button
840125000 ENv01.qxd 12/14/04 3:04 PM Page 6