Check character, Check character -4, Codabar (continued) – Hand Held Products IT3800 User Manual
Page 72
7 - 4
Codabar (continued)
Check Character
Codabar check characters are created using different “modulos.” You can
program the scanner to read only Codabar bar codes with Modulo 16 check
characters. Default = No Check Character.
No Check Character indicates that the scanner reads and transmits bar code
data with or without a check character.
When Check Character is set to
Validate and Transmit, the scanner will only
read Codabar bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
When Check Character is set to
Validate, but Don’t Transmit, the unit will only
read Codabar bar codes printed
with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16 and Transmit
Validate Modulo 16, but
Don’t Transmit