Msi, continued, Check character, Msi -34 – Hand Held Products IT3800 User Manual
Page 102: Msi, continued -34 check character -34, Msi msi, continued
Advertising
7 - 34
MSI
<Default All MSI Settings>
MSI
MSI, continued
Check Character
Different types of check characters are used with MSI bar codes. You can
program the scanner to read only MSI bar codes with Type 10 or Type 11 check
characters. Default = Validate Type 10, but Don’t Transmit.
When Check Character is set to
Validate and Transmit, the scanner will only
read MSI bar codes printed with the specified type check character, and will
transmit this character at the end of the scanned data.
On
* Off
Advertising
This manual is related to the following products: