Hand Held Products IT3800 - Manual (Page 103)

IT3800/3900 User’s Guide 7 - 35
MSI, continued
When Check Character is set to Validate, but Don’t Transmit, the unit will only
read MSI bar codes printed with the specified type check character, but will not
transmit the check character with the scanned data.
MSI Message Length
Note: Scan the bar codes below to change the message length. Refer to
Message Length Description (page 7-2) for additional information.
Minimum and Maximum lengths = 4-48. Minimum Default = 4, Maximum
Default = 48.
Validate Type 10 and Transmit
* Validate Type 10, but Don’t
Transmit
Validate Type 11, but Don’t
Transmit
Validate Type 11 and Transmit
Minimum Message Length
Maximum Message Length