Keyboard modifiers, Keyboard modifiers -6 – Hand Held Products IT3800 User Manual
Page 32
2 - 6
Shift Lock is used when you normally have the Shift Lock key on (not common
to U.S. keyboards).
Automatic Caps Lock is used if you change the Caps Lock key on and off. The
software tracks and reflects if you have Caps Lock on or off (AT and PS/2 only).
This selection can only be used with systems that have an LED which notes the
Caps Lock status.
Emulate External Keyboard should be scanned if you do not have an external
keyboard (IBM AT or equivalent). To connect the scanner to a laptop, it may be
necessary to use the Automatic Direct Connect selection on
in
conjunction with the bar code below.
Note: After scanning the Emulate External Keyboard bar code, you must power
cycle your computer.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo
Mode.
Control + ASCII Mode On: The scanner sends key combinations for ASCII
control characters for values 00-1F. Refer to
for CTRL+ ASCII
Values. Default = Off
Shift Lock
Automatic Caps Lock
Emulate External Keyboard
Control + ASCII Mode On
* Control + ASCII Mode Off