Hand Held Products IT3800 - Manual (Page 40)

2 - 14 IT3800/3900 User’s Guide
Wand Emulation Polarity
The Polarity can be sent as standard with black bars high, or reversed with white
bars high. Default = Black High.
Wand Emulation Idle
The idle describes the state of the scanner when no data is being transmitted.
When in Wand Emulation mode, you must set the scanner’s idle state to match
the idle state for the device to which the scanner is connected. Default = Idle
High.
* Black High
White High
* Idle High
Idle Low