Hand Held Products IT3800 - Manual (Page 46)

3 - 4 IT3800/3900 User’s Guide
Good Read Delay
This sets the minimum amount of time before the scanner can read another bar
code. Default = No Delay.
Trigger Mode
Manual/Serial Trigger: You can activate the scanner either by pressing the
trigger, or using a serial trigger command (see "Trigger Commands" on page 12-
4). When in manual trigger mode, the scanner scans until a bar code is read, or
until the trigger is released.
When in serial mode, the scanner scans until a bar code has been read or until
the deactivate command is sent. In serial mode, the scanner can also be set to
turn itself off after a specified time has elapsed (see
Serial Trigger Time Out ,
which follows). Default for IT3800.
* No Delay
Short Delay
Medium Delay
Long Delay
Manual/Serial Trigger