Hand Held Products IT3800 - Manual (Page 88)

7 - 20 IT3800/3900 User’s Guide
Telepen
Telepen Output
Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2). Default = AIM Telepen Output.
Telepen Message Length
Note: Scan the bar codes below to change the message length. Refer to
Message Length Description (page 7-2) for additional information.
Minimum and Maximum lengths = 1-60. Minimum Default = 1, Maximum
Default = 60.
* On
Off
Original Telepen Output
* AIM Telepen Output
Minimum Message Length
Maximum Message Length