Home Automation RC-81 - Manual (Page 12)

Press the Mode key when complete, or simply wait 8 seconds for the
display to return to normal.
PROGRAMMING
Your thermostat may be programmed to set the variance for higher
energy rates and to adjust the heat and cool settings up to 4 times per
day (
MORN , DAY , EVE , NITE ). You can setup a temperature time
schedule for weekdays, Saturday, and Sunday.
When in programming mode:
1. The item that is being programmed will flash.
2. The up arrow key (
∧
) is used to increase the value.
3. The down arrow key (
∨
) is used to decrease the value.
4. The Prog (>) key is used to advance to the next item.
5. The Hold (<) key is used to return to the previous item.
6. To exit programming mode, press the Mode key.
The thermostat will automatically exit programming mode after 20
seconds of no key activity.
SETTING THE VARIATION FOR HIGHER RATES
To view or change the variation for MID , HI and CRIT rates, press
the Prog key four times. The display will show RATE MID . The
variation, in degrees, for the MID rate will flash:
::
P
OFF
DAY
8