Honeywell RCWL330A - Manual (Page 12)

Installation Instructions
69-2148EFS—01 10
Programming Procedure
Learn procedure
To enable your chime to learn the identity
of your bell push:
• Press the l button and keep it
pressed. Each Icon will light in
turn. When the Icon you want is lit,
release the button.
• While the Icon you have selected is
lit, operate your push. The chime will
sound. The Icon will flash.
Unlearn procedure
If you want to remove a push from the
chime’s memory:
• Press the l button and keep it
pressed. Each Icon will light in turn.
When the Icon associated with the
push to be unlearned is lit, release
the button.
• Press and hold both l & buttons
until a “beep” sound is heard.
69-2148EFS_A.indd 10 3/20/2008 9:34:24 AM