Harbor Freight Tools 03514 User Manual
Page 4
SKU 03514/92927
For technical questions, please call 1-800-444-3353. Page 4
6 VOLT DC
ADAPTER TRANSFORMER (10)
3-PRONG ADAPTER PLUG
(NOT INCLUDED)
GROUNDED, 120 VOLT AC
ELECTRICAL OUTLET
FIGURE A
9.
REDUCE THE RISK OF ACCIDENTAL STARTING. Make sure the Motorcycle’s
Throttle Pedal (2) is in the “UP/OFF” position before plugging the 6 Volt DC
Adapter Transformer into a grounded, 3-hole, 120 Volt, electrical outlet.
10.
DO NOT ABUSE THE 6 VOLT DC ADAPTER TRANSFORMER CORD
(10). Do not use the Cord to pull its Plug from an electrical power outlet. Keep the
Cord away from heat, oil, sharp edges, and moving parts. Route the Cord safely.
Do not route the Cord where it can be walked on or tripped over. Replace a
damaged Cord immediately.
11.
IF AN ELECTRICAL EXTENSION CORD (not included) IS USED WHEN
CHARGING THIS PRODUCT, MAKE SURE TO USE ONLY UL APPROVED
CORDS HAVING THE CORRECT GAUGE AND LENGTH.
(See Figure B, next page.)
12.
PROPER BATTERY CARE: Battery (9) leakage may occur under extreme usage
or temperature conditions. Never allow children to handle the 6 Volt DC Battery
for this product. If Battery fluid comes in contact with skin, wash with
7.
DO NOT ATTEMPT TO REMOVE DEBRIS OR FOREIGN MATERIAL CAUGHT
IN THE MOVING PARTS OF THIS PRODUCT WHILE THE MOTORCYCLE’S
THROTTLE PEDAL (2) IS IN THE “ON/DOWN” POSITION. Release pressure on
the Throttle Pedal to turn off and stop the Motorcycle.
8.
GROUND THE ELECTRIC ADAPTER TRANSFORMER OF THIS PRODUCT. The
6 Volt DC Adapter Transformer (10) for this product is equipped with a 2-Prong Plug
and requires the use of a grounded, 3-Prong Adapter Plug (not included). To comply
with the National Electric Code, and to provide additional protection from the risk of
electrical shock, this product should only be connected to a 120 Volt, 3-hole electrical
outlet that is protected by a Ground Fault Circuit Interrupter (GFCI). (See Figure
A.)