HP OmniBook User Manual
Page 64
64
•
Check whether Num Lock is off. Try changing it.
•
If you’ve forgotten your password, have your OmniBook and proof of purchase
at hand and call Hewlett-Packard at the phone number in the Support and
Service booklet or in OmniBook Support in the online OmniBook Library.
Lockup Problems
If you have problems that interfere with turning on or starting the OmniBook, see the
troubleshooting chapter in the OmniBook Installation and Setup Guide, which came
with the OmniBook.
If the OmniBook stops responding during startup
•
Don’t move the pointing device or an external mouse excessively during startup.
If an application stops responding
•
Press Ctrl+Alt+Del, then stop the application.
•
Reboot
the OmniBook.
If a screen saver causes lockup
•
If you’ve previously set up an OmniBook password, you should delete the
OmniBook password. Screen savers conflict with password protection, and
together they can lock up the OmniBook.