Harbor Freight Tools 9018 - Manual (Page 5)

Page 5
SKU 09018
Assembly (continued)
Umbrella (#8)
Screw (#7)
Pole (#12)
Chair
Board
(#4)
Chair Stand (#3)
FIGURE 4
FIGURE 5
4. Connect the Umbrella (#8) and the
Pole (#12) using Screw (#7). Slide the
Pole (#12) into the Umbrella Stand (#9).
See FIGURE 4.
Umbrella Stand (#9)
5. Attach the Chair Board (#4)
to the Chair Stand (#3)
using four sets of
Screws (#6).
Maintenance
Note: Remember to set
the Patio Set up on a
flat, dry, level surface. Do
not deploy the Umbrella (#8)
during windy conditions.
1. Periodically check the hardware and tighten if necessary.
2. If you leave the set outdoors during inclement weather, it is recommended that you seal
the set with a marine quality varnish or paint.