Hisense Group KFR 2601GW/BPE - Manual (Page 16)

Using the 1-Hour OFF Timer
14
C
1HR ON/OFF TEMP
HIGH
POWER
FLAP
ON OFF
SET CLR SLEEP
A/C SENSOR ACL BATTERY
FAN
SPEED
MODE
AUTO
AUTO
SOFT
1HOUR 1HOUR
This function causes the system to operate for one hour and then stop, regardless
of whether the unit is on or off when this button is pressed.
The " " indicator in the display indicates that this function is operating.
Setting procedures:
Regardless of whether the unit is operating or stopped, press the 1 HR .TIMER button.
" " appears In the display.
Cancellation procedures:
Pressing the ON/OFF operation button to turn off, wait for the unit to stop operating,
and then press the ON/OFFoperation button again. The 1-Hour Timer function is now
cancelled and the unit operates normally.
¡ñ If, while the 1-Hour Timer function is operating, the 1 HR.TIMER button is
pressed once to cancel the function and then again, the unit will continue to
operate for one hour from that point in time and then stops.
¡ñIf the 1 HR.TIMER button is pressed while the TIMER OFF function operate,the
OFF Timer is cancelled and the unit will stop operating one hour later.
This operation makes higher or lower temperature airflow than usual, in winter or
summer, which makes you feel comfortanble as soon as you go home.
Setting procedures:
press the High Efficiency button on the remote control unit gently, with a whisper, and
the lamp on the disolay panel is lighted, so the high efficient operation comes to work. It
may last the longest time of 15 minutes.
Cancellation procedures:
Pressing the High POWER button again, with a second whisper, the lamp is out.
1HOUR 1HOUR
1HOUR 1HOUR
NOTE
HIGH POWER Operation
C
1HR ON/OFF TEMP
HIGH
POWER
FLAP
ON OFF
SET CLR SLEEP
A/C SENSOR ACL BATTERY
FAN
SPEED
MODE
AUTO
AUTO
SOFT
1HOUR 1HOUR
POWER
TIMER
OPERATING
HIGH POWER lamp
ON/OFF button