Hisense Group KFR 2601GW/BPE - Manual (Page 15)

HOUR HOUR
Using the 12-Hour ON and OFF Timer
C
1HR ON/OFF TEMP
HIGH
POWER
FLAP
ON OFF
SET CLR SLEEP
A/C SENSOR ACL BATTERY
FAN
SPEED
MODE
SOFT
STEP 2
STEP 3
STEP 1
1.TIMER ON mode
(Example)
After the length of timer set for TIMER ON elapses, the unit begins operating.
The display depicted at left lindicates that the air conditioner will begin operating in
three hours.
Setting Procedures:
STEP 1 Press the MODE button and set the desired operation mode and
press the ON/OFF operation button.
STEP 2 Press the timer ON button to set the time at which you want
operation to begin. The time can be set for one to twelve hours,
in one hour steps.
1 2 3....... 12
STEP 3 Press the timer SET button (which advances the time displayed).
¡ñ The display changes immediately to its status previous to timer setting, but the
¡° ¡±indication remains.
¡ñ To check the status of the timer while it is counting down, press the timer SET
button .
Cancellation procedures: press the CANCEL button once again.
1.TIMER OFF mode
(Example)
HOUR HOUR
C
1HR ON/OFF TEMP
HIGH
POWER
FLAP
ON OFF
SET CLR SLEEP
A/C SENSOR ACL BATTERY
FAN
SPEED
MODE
SOFT
STEP 2
STEP 1
13
After the length of timer set for TIMER OFF elapses, the unit stops operating.
The display depicted at left lindicates that the air conditioner will stop operating in
five hours.
Setting Procedures:
STEP 1 Press the OFF button and set the time at which you want
operation to stop.
The time can be set for one to twelve hours, in one hour steps.
STEP 2
1 2 3....... 12
Press the timer SET button (which advances the time displayed).
¡ñ The display changes immediately to its status previous to timer setting, but the
¡° ¡±indication remains.
¡ñ To check the status of the timer while it is counting down, press the timer SET
button .
Cancellation procedures: press the CANCEL button once again.