Hydro Systems A P18 - Manual (Page 9)

7
Process washing
1.Put in the laundr y and detergent,then fill with this
correct amount of washer.
Install the water inlet hose
Insert the water inlet hose into the water-filling
entrance on the control panel.
Water inlet hose
Water-filling
entrance
Install the water inlet hose
2.Close the top lid
3.Connect the power line
Confirm that the washing machine is
earthed reliably. Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
1.Confirm that the drain hose is properly
stowed before filling with water, or the water
will flow through the drain hose.
2.Inside the machine you will see water filling
levels-"1"
"2" "3"and"MAX".
This relates to the amount of washing you are
doing.Never exceed the "MAX"Mark!
3.
NOTE