HONDA CT110 - Manual

THIS IS A OWNERS MANUAL FOR A HONDA CT110 SERIES
MOTORCYCLE. PLEASE BE ADVISED THAT THIS IS THE CLOSEST
THING TO THE HARDKNOCK BOBBER. WE ARE NOT RESPONSIBLE
FOR ANY INACCURACIES IN THIS MANUAL NOR MISUSE OR NON
MAINTENANCE DONE ON YOUR BIKE. PLEASE READ WITH CARE
AND USE COMMON SENSE. THANKS AND ENJOY YOUR
HARDKNOCK BOBBER.
ENGINE OIL
Engine Oil Level Check
Check the engine oil level each day before riding the motorcycle. The level must be maintained between
the upper (2) and lower (3) marks on the dipstick (1).
1. Start the engine and let it idle for a few minutes.
2. Stop the engine and hold the motorcycle in an upright position on firm, level ground.
3. After a few minutes, remove the oil filler cap/dipstick, wipe it clean, and reinsert the dipstick
without screwing it in. The oil level should be between the upper and lower marks on the
dipstick.
4. If required, add the specified oil up to the upper level mark . Do not overfill.
5. Reinstall the oil filler cap/dipstick, check for oil leaks.
CAUTION
Running the engine with insufficient oil can cause serious engine damage.
TYRES
Proper air pressure will provide maximum stability, riding comfort and tire life. Check tire pressure
frequently and adjust if necessary.
NOTE
Tire pressure should be checked before you ride while the tyres are cold.
Select the right replacement tire in accordance with the following specifications:
Cold tire
pressures kPa ( kg/cm
2 , psi )
Front: 175 ( 1.75, 25 )
Rear : 225 ( 2.25, 33 )
Tire size
Front: 2.75 - 17 41P
Rear : 2.75 - 17 41P
Check the tires for cuts, embedded nails, ore other sharp objects. See your authorized Honda Dealer for
replacement of damaged tires or punctured inner tubes.
WARNING
•
Do not attempt to patch a damaged tire or inner tube. Wheel balance