Specifications – Humminbird PIRANHAMAX 160 User Manual

Page 51

Advertising
background image

Specifications

Depth Capability............................................................

600 ft (185 m) – (PMAX150/160)

800 ft (250 m) – (PMAX170/180/190c)

Power Output

.................................................................800 Watts (PTP) – (PMAX150/160)

1600 Watts (PTP) – (PMAX170/180/190c)

Operating Frequency

............................................. 200 kHz Single Beam (PMAX150/190c)

200 kHz and 83 kHz Dual Beam™ (PMAX160/170)

200 kHz and 455 kHz Tri Beam (PMAX180 only)

Area of Coverage (PMAX150/190c)

.......................................... 20° @ -10 dB in 200 kHz

Area of Coverage (PMAX160/170)

.............................................. 60° @ -10 dB in 83 kHz

20° @ -10 dB in 200 kHz

Area of Coverage (PMAX180)

.................................................... 20° @ -10 dB in 200 kHz

90°Total Coverage (Two 35° Beams) @ -10 dB in 455 kHz

Target Separation

............................................................................ 2 1/2 Inches (63.5 mm)

Power Requirement

............................................................................................. 10-20 VDC

LCD Matrix

..........................................................................160 V x 128 H – (PMAX150/160)

240 V x 160 H – (PMAX170/180)

320 V x 240 H – (PMAX190c)

Transducer

...............................................................XNT-9-20-T – (PMAX150/160/170/190c)

XNT-9-QB-90-T – (PMAX180)

Transducer Cable Length

..................................................................................... 20 ft (6 m)

NOTE: Product specifications and features are subject to change without notice.

NOTE: Humminbird® verifies maximum stated depth in saltwater conditions,
however actual depth performance may vary due to transducer installation, water
type, thermal layers, bottom composition, and slope.

45

Advertising
This manual is related to the following products: