Humminbird PIRANHAMAX 160 - Manual (Page 38)

Chart Speed
(Setting Saved in Memory)
Press the POWER-MENU key until CHART SPEED appears. Select a setting
from 1-5 to increase or decrease the chart speed, where 1 is the slowest and
5 is the fastest chart speed. Chart speed determines the speed at which the
sonar information moves across the display, and consequently the amount of
detail shown. A faster speed shows more information and is preferred by most
anglers; however, the sonar information moves across the display quickly. A
slower speed keeps the information on the display longer, but the bottom and
fish details become compressed and may be difficult to interpret. (1 to 5,
Default = 5)
Fish Alarm
(Setting Saved in Memory)
Press the POWER-MENU key until FISH ALARM appears. Select Off for no fish
alarm, or one of the following symbols to set the alarm. An alarm will sound
when the PiranhaMAX™ detects fish that correspond to the alarm setting.
Fish Alarm will only sound if Fish ID+™ is also set to On. (Off, Large,
Large/Medium, All, Default = Off)
Depth Alarm
(Setting Saved in Memory)
Press the POWER-MENU key until DEPTH ALARM appears. Select OFF for no
Depth Alarm, or select 3 to 99 feet to set the alarm depth. An audible alarm
sounds when the depth is equal to or less than the setting. (Off, 3 to 99 feet,
Default = Off)
Large fish only
Large/Medium fish only
All fish
32