Fish id+tm (setup menu), Bottom view (setup menu), Fish id – Humminbird PIRANHAMAX 160 User Manual
Page 40: Setup menu), Si ng le be am, Du al be am tr ib ea m
Fish ID+
TM
(SetUp Menu)
(Setting Saved in Memory)
Make sure that the SetUp menu is selected, then press the POWER-MENU key
until FISH ID+
TM
appears. Select either Off to view “raw” sonar returns or On to
view Fish symbols. Fish ID+
TM
uses advanced signal processing to interpret
sonar returns, and will display a Fish Symbol when very selective requirements
are met. A select number of possible fish returns will be displayed with their
associated depth. (On, Off, Default = On)
Scroll through all SetUp menu choices to exit the SetUp menu.
NOTE: Returns from the 200 kHz narrow beam are shown with shaded fish
symbols while the 83 kHz wide beam (and 455 kHz beam) returns are displayed
with hollow fish symbols.
NOTE: Hollow fish symbols are not available on 200 kHz Single Beam sonar units.
Bottom View (SetUp Menu)
(Setting Saved in Memory)
Make sure that the SetUp menu is selected, then press the POWER-MENU
key until BOTTOM VIEW appears. Bottom View selects the method used to
represent the bottom and structure on the display. (Structure ID, Black,
WhiteLine, Inverse, Default = Inverse)
Scroll through all SetUp menu choices to exit the SetUp menu.
Raw Sonar,
Fish ID+
TM
Off
Si
ng
le
Be
am
200 kHz
Narrow beam,
Fish ID+
TM
On
Du
al
Be
am
Tr
iB
ea
m
Raw Sonar,
Fish ID+
TM
Off
200 kHz
Narrow beam,
Fish ID+
TM
On
83 kHz
Wide beam,
Fish ID+
TM
On
Raw Sonar,
Fish ID+
TM
Off
200 kHz
Narrow beam,
Fish ID+
TM
On
455 kHz
Left and right beam,
Fish ID+
TM
On
34