Harman-Kardon harman/kardon Compact Disc Player HD710 - Manual (Page 8)

ENGLISH
Example: If you wish to program the
tracks 4, 8 and 17, the programming
procedure is as follows.
1. In the stop mode, press the PRO-
GRAM button, the MEMORY light in the
display will start blinking.
2. Select the desired track with the SKIP
buttons or NUMERIC buttons on the
remote.
3. Press the PROGRAM button. The
TOTAL light and the program number
(1-20) in the display will illuminate.
7
Press and hold down the FORWARD
or BACKWARD SEARCH button
( / ) and release the button
when the desired point has been
reached.
If the CD player reaches the end of
the last track during forward search,
the unit switches to the stop mode.
If the CD player reaches the begin-
ning of a CD during backward search
in normal play mode, play restarts at
this point.
If the CD player reaches the begin-
ning of a track during backward
search in random or programmed play
mode, play restarts at this point.
You can program up to 20 tracks to play
in any sequence you choose.
If you exceed 20 tracks, the “Full” sign
appears to remind you that the memory is
full and cannot accept any more tracks.
PROGRAMMED PLAY 4. Repeat steps 2 and 3 to complete
programming.
5.
PROGRAMMING
SEARCH
SEARCHING A SPECIFIC PASSAGE IN
PLAY MODE
•
•
•
TRACK MEMORY DISC
4
TRACK MEMORY
TOTAL
DISC
4
TRACK MEMORY MIN SEC DISC
1 2 3 4 5 6 7 8
11 12 13 14 15 16 17 18 19 20
9 10
OVER
TRACK INDEX
STEP
MEMORY
TOTAL
DISC
4 9
TRACK MEMORY
TOTAL
DISC
4 8
17
Press the PLAY button.
After the last programmed track has
been played, the last programmed
track number and the total playing time
of the programmed tracks are shown
on the display.
During program play, if you want
normal play, select the desired track
with the NUMERIC buttons, then
normal play will start that track.
If you want program play again, press
the PROGRAM button in the stop
mode, then the unit switches to the
program mode.
•
•
•
➡
After selecting a desired track with the
FORWARD or BACKWARD SKIP
button, press the REPEAT button
twice before or during play.
REPEAT ONE appears on the display
and the selected track will be re-
peated.
If the REPEAT button is pressed once
again in this mode, repeat play mode
is canceled.
REPEAT ONE TRACK
•
•
•
REPEAT ALL TRACKS
REPEAT PLAY
Press the REPEAT button before or
during play.
REPEAT ALL appears on the display
and all tracks of the CD will be
repeated.
If the CD player reaches the end of
the last track during forward search,
the unit goes back to the beginning of
the first track and continues to search
forward.
•
•
•