Holux 240 - Manual (Page 22)

HOLUX GPSlim240 Wireless Bluetooth GPS Receiver User Guide
22
7. USB Cable Driver Installation
The selected USB cable, which complements the GPS receiver requires
the driver to be installed.
The following steps detail the installation of the USB cable.
7.1. System Requirements
CPU: IBM, Pentium and higher, or other compatible systems
Memory: At least 16 MB
Operating System: Windows 98/ Me/ 2000/XP
7.2. Installation
1) Copy ->English->USB Driver->Win98_2k_XP USB-V2.1.0.exe from the
CD to the hard disk.
2) Execute USB-V2.1.0.exe
3) Connect the
USB cable to the computer. The system will automatically
search for the plug-and-play device and then automatically start the installation. This
step completes the entire USB Driver installation.
7.3. Important Notes
1) After the driver installation has been completed, verify the COM port at which
the USB was installed.
a. Click <Start> menu, select <Setting>, then enter <Control Panel>
b. In <Control Panel> select <System>, then < System Properties>
c. Select < Device Manager >
d. Select <Ports (COM & LPT)> and check if the <USB to Serial Port
(COM#)> is found. If installation is completed, the product can now be
used.
"#" represents the Virtual COM Port that was created by the
computer. Before using the navigation software, please ensure
that the port settings on both the navigation software (usually
COM 1) and the computer are identical, so as to correctly receive
the data.