Hughes Inmarsat 3004066-001 - Manual (Page 2)

2 3004090-0001 Revision A
Step C. Determining where to install the terminal
In order for your terminal to work correctly, it must be installed in a location that provides a clear,
unobstructed, line of sight between the terminal and the satellite. Any objects such as building structures or
trees may degrade the quality of the satellite to terminal connection. To determine where to install the fixed
mount and terminal, you need to determine that you have both a clear unobstructed line of sight to the
satellite and that your fixed mount is aimed in the approximate direction to the satellite. A graphic example
is provided for you at Figure 4 and a full size worksheet for your use is provide at Figure 10 (page 7). An
example of directional aiming is provided below
Table 1: List of tamper-proof fasteners
Item No. Description
1 # 1/4-20 in. Penta nut
2 # 1/4-20 x 2.25 in. Penta screw
3 # 1/4-20 x 0.5 in. Penta screw
4 # 1/4-20 x 1.5 in Penta screw
5 # 8-1/4 Penta plus bit
6 # 1/4 Penta socket
Figure 3 - Terminal bracket tamper-proof fasteners Figure 2 - Base bracket tamper-proof fasteners