Husqvarna BREEZE QC 720 - Manual (Page 8)

36
B
C
A
A
B
C
A
B
C
D
Mounting of cooker hood in a
cupboard, Alt. 2 (Fig. 7):
 Cut an opening in the underside of the cupboard.
Use the template printed on the packaging.
€ Mount the cooker hood with two screws (A) and the
spacers (B).
 Fit the plastic covers (C).
Mounting of cooker hood between
cupboards (Fig. 8):
 Fit the two brackets (A) on the cooker hood.
€ Mark out the exact location to drill in the sides of
the cupboards.
 Mount the cooker hood with four screws (B),
washers (C) and the nuts (D).
Fig. 8
Fig. 9
Mounting of cooker hood on wall
(Fig. 9):
 Mark out where the 4 holes shall be drilled on the
wall. Drill in the markings with an Ø8 mm drill and
fit rawl plugs into the holes. Use the template
printed on the packaging.
€ Fix the screws (A). Leave about 5 mm distance
between the screws and the wall.
 Hook the cooker hood on the screws (A).
 Remove the grease filter and mount the screws (B)
in the two lower holes. Remove the grease filter by
pulling it backwards (against the wall) and then
downwards.
‚ Tighten the screws (A).
ƒ Mount the grease filter.
Fig. 7
Mounting of cooker hood in a
cupboard, Alt. 1 (Fig. 6):
 Cut an opening and drill 4 holes in the underside of
the cupboard. Use the template printed on the
packaging.
€ Mount the locknuts (A) on the cooker hood.
Mount the cooker hood with four screws (B) and
washers (C).
1
2
A
B
C
Fig. 6