Hunter Fan 35203 - Manual (Page 4)

41793 10/19/2006 © 2006 Hunter Fan Company 4
1. Remove the Care Free® Warm Mist
Humidifier from its packaging.
2. Select a location for your humidifier. The
location should be flat, hard, water-
resistant, and at least six (6) inches
away from walls and sources of heat.
Mount the humidifier on a drip tray
if you are using the unit on a wood
surface or other surface which could be
damaged by accidental water spillage or
condensation.
hunTeR WILL noT accePT ReSPonSIBILITY
FoR daMaGe due To WaTeR SPILLaGe.
3. Place the Base in the location you
selected. Take the Water Tank to a sink or
tub to fill with water.
4. Unscrew the Tank Cap by twisting it
counterclockwise and fill the Water Tank
with fresh, cool water. neveR uSe hoT
WaTeR.
5. Replace the Tank Cap by screwing it
clockwise onto the Water Tank.
6. Place the Water Tank back onto the Base.
Make sure the Water Tank is properly
seated on the Base or the humidifier will
not work properly.
hunTeR WILL noT accePT ReSPonSIBILITY
FoR daMaGe due To WaTeR SPILLaGe.
7. Make sure the Power Button is set to
OFF and plug the humidifier into the wall
outlet.
cauTIon: never plug in the
humidifier while your hands are wet, as
electric shock could occur.
NOTE: Let the humidifier sit for one minute
after refilling the tank, before turning the
power back ON.
8. Push the Power Button to turn the
humidifier ON. Adjust the setting as
needed.
Base
Water
Tank