HP 2010 - Manual (Page 30)

Icon Main Menu Options Sub-menu Options Description
Sleep Timer Provides the timer-adjustment menu
options:
Set Current Time — Sets the current
time in hours and minutes.
Set Sleep Time — Sets the time you
want to place the monitor in sleep mode.
Set On Time — Sets the time you want
the monitor to wake up from sleep
mode.
Timer — Sets the Sleep Timer feature
on or off; the default setting is Off.
Sleep Now — Immediately sets the
monitor to enter sleep mode.
Language Selects the language in which the OSD
menu is displayed. The factory default is
English.
Information Selects and displays important
information about the monitor.
Current Settings Provides the current input video mode.
Recommended Settings Provides the recommended resolution
mode and refresh rate for the monitor.
Serial Number Reports the serial number of the
monitor. The serial number is needed if
contacting HP technical support.
Version Reports the firmware version of the
monitor.
Backlight Hours Reports the total hours of backlight
operation.
Service Support For service support, go to:
http://www.hp.com/support
Factory Reset Returns settings to factory defaults.
Source Control Selects the video input signal. VGA is
the factory default.
DVI Selects DVI as the video input signal.
HDMI Selects HDMI as the video input signal.
(select models)
VGA Selects VGA as the video input signal.
24 Chapter 4 Operating the Monitor