2 rtcm received data – Holux GM-82 User Manual

Page 10

Advertising
background image


GM-82 User’s manual

10

Speed

0.2

km/hr Measured horizontal speed

Units

K

Kilometers per hour

Checksum *6E

<CR> <LF>

End of message termination

(1). SiRF Technology Inc. does not support magnetic declination. All “course over ground” data are geodetic WGS84
directions.

4.1.6 MSK Receiver Signal (MSS)


Table C-9 contains the values for the following example:

$GPMSS,55,27,318.0,100,*66

Table C-9
MSS Data Format

Name Example

Units Description

Message ID

$GPMSS

MSS

protocol header

Signal Strength

55

dB

dB SS of tracked frequency

Signal-to-Noise Ratio

27

dB

SNR of tracked frequency

Beacon Frequency

318.0

kHz

Currently tracked frequency

Beacon Bit Rate

100

100 bits per second


Note –
The MSS NMEA message can only be polled or scheduled using the MSK NMEA input message.


4.2 RTCM Received Data

The default communication parameters for DGPS Input are 9600 baud, 8 data bits, stop bit, and no

parity. Position accuracy of less than 5 meters can be achieved with the GPS-82 by using Differential GPS
(DGPS) real-time pseudo-range correction data in RTCM SC-104 format, with message types 1,2, or 9. As

Advertising