Heath Zenith Motion Sensing 3-Way Wall Switch SL-6107 - Manual (Page 14)

595-4514-14 -14-
This product is to be installed indoors only.
Electrical Input .............................................................120V, 60 Hz.
Fluorescent* Load .........................................(2) 30 Watt minimum,
Up to 400 Watts Maximum Rapid Start Ballast
Motor Load .................................................Up to 1/8 HP Maximum
Incandescent ....................................... Up to 500 Watts at 120VAC
On-Time ........................Adjustable approximately 5 sec. to 20 min.
Photocell Sensor .....................From full daylight to less than 1 FC.
Coverage .............................................. up to 15 ft. (4.6 m) at 150°,
up to 30 ft. (9.1 m) in front of the sensor
Specification subject to change without notice.
*Designed for use with standard 3 ft./30 watt and 4 ft./40 watt
rapid-start fluorescent tubes.
not designed for use with compact
fluorescent bulbs.
Minimum of two tubes required.
Note: May not be used to operate
electronic or magnetic ballasts.
DESA Specialty Products reserves the right to discontinue products
and to change specifications at any time without incurring any obliga-
tion to incorporate new features in previously sold products.
SPeciFicationS