Spark arrester (optional equipment), Sediment cup cleaning – HONDA WMP20X User Manual

Page 10

Advertising
background image

10

5. Check that the spark

plug washer is in good
condition, and thread the
spark plug in by hand to
prevent cross-threading.

6. After the spark plug is

seated, tighten with a
spark plug wrench to
compress the washer.

If installing a new spark plug, tighten 1/2 turn after the spark plug
seats to compress the washer.

If reinstalling a used spark plug, tighten 1/8 - 1/4 turn after the
spark plug seats to compress the washer.

NOTICE

A loose spark plug can overheat and damage the engine.
Overtightening the spark plug can damage the threads in the
cylinder head.

7. Reconnect the spark plug cap.

Spark Arrester (optional equipment)

Your pump engine is not factory-equipped with a spark arrester. In
some areas, it is illegal to operate an engine without a spark arrester.
Check local laws and regulations. An optional USDA approved spark
arrester is available from an authorized Honda servicing dealer. See
page 16 for part numbers.

The spark arrester must be serviced every 100 hours to keep it
functioning as designed.

1. Allow the engine to cool, then remove the two 8 mm nuts and

remove the muffler from the cylinder head.

2. Remove the four 5 mm screws from the muffler protector and

remove the muffler protector.

3. Remove the 4 mm screw from the spark arrester and remove the

spark arrester from the muffler.

4. Use a stiff brush to remove

carbon deposits from the spark
arrester screen. Be careful not
to damage the spark arrester
screen.

5. Inspect the spark arrester for

breaks and holes. Replace it if
necessary.

6. Install the spark arrester and the

muffler in the reverse order of
disassembly.

Sediment Cup Cleaning

1. Turn the fuel valve to the

OFF position.

2. Remove the sediment

cup and O-ring and wash
them in nonflammable
solvent. Dry them
thoroughly.

3. Install the O-ring and

sediment cup and tighten
securely.

4. Turn the fuel valve to the

ON position and check
for leaks.

MUFFLER
PROTECTOR

8 mm NUT (2)

SPARK
ARRESTER

4 mm SCREW

5 mm SCREW (4)

MUFFLER

SPARK ARRESTER SCREEN

FUEL
VALVE

SEDIMENT CUP

O-RING

OFF

ON

POM50594-G_WMP20X.fm Page 10 Tuesday, March 25, 2008 2:34 PM

Advertising