Set current time/day, Heating program – Honeywell CT2095 User Manual
Page 15
15
69-1385
NOTE:
Batteries are required for operation and programming. When inserting batteries, set the
System switch to Off. Remove the battery door (on the thermostat left side) using a coin at
the bottom. Follow instructions in Step 3. Also see the label inside the battery cover for
abbreviated programming procedures for your thermostat.
Set Current Time/Day
To set time, press and release
once, press
until current shows. To set day, press and
release
again, press
until current day shows; then press
.
Heating Program
With System switch at Heat, press and release
once. WAKE, MON FRI (Monday-Friday), and
SET appear on display.
Use
to program WAKE time and
to program WAKE temperature for MON FRI (Monday-Friday).
Repeat sequence for LEAVE, RETURN, SLEEP.
Clock/Day
Time
Clock/Day
Time
Run Program
Weekday
Time
TEMP