HP FAX-700 - Manual (Page 199)

Problem Resolution 5Ć24
Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)
Service
Parameter
Number
Display
Indication
Parameter
Description
Settings Current
Setting
Standard
Setting
41 CED TO 300
INTRVL This is the time interval
from the CED (called sta-
tion identification) signal
to the 300 bps signal 01: 75 ms* 02: 1 s 1 1
42 CSI TRANSMIT Selects whether or not to
transmit “Called Sub-
scriber Identification”
when called 0:off / 1:on* 1 1
43 TSI TRANSMIT Selects whether or not to
transmit a request for
“Called Transmitting Sub-
scriber Identification”
when contacting another
fax machine 0:off / 1:on* 1 1
44 CIG TRANSMIT Selects whether or not to
transmit a “Calling Sub-
scriber Identification”
when contacting another
fax machine 0:off / 1:on* 1 1
45 CHAR ID
TRANSMIT Selects whether or not to
transmit a character ID
when contacting another
fax machine 0:off* / 1:on 0 0
46 ERROR
DETECT Selects the mode of error
detection 01: lines 02: ratio* 2 2
47 LINE ERROR Number of lines received
in error 01: 128 lines*
02: 256 lines
03: 512 lines
04: 1024 lines
05: 2148 lines 1 1
48 TOTAL ERROR Percent of fax received in
error 01: 5%
02: 10%
03: 15%*
04: 20% 3 3
49 RETURN
RECEIVE Selects between discon-
necting or continuing
when the machine re-
ceives an RTN signal 01: disconnect*
02: continue
1 1
50 FALLBACK
2400 BPS If ON and received
image is degraded, re-
send message at 2400
BPS 0:off / 1:on* 1 1