Hisense Group C2005US - Manual (Page 7)

-5-
Learning about your new TV
You can operate your TV by using the buttons on the front panel or the remote control. The terminals on
the back panel provide all the connections you will need to connect other equipment to your TV.
Caution:
The TV power plug has one prong wider than the other and will fit only one way into a standard
electrical outlet ( 120VAC,60Hz ). If the plug does not fit into the outlet, try turning it around. If the
plug still does not fit, the outlet is probably non-standard and must be replaced by a qualified
electrician.
Do not tamper with the plug or try to force it into a non-standard outlet.
Selecting a location for the TV
1 ) Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.
2 ) Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause
overheating, which may damage the TV.
Note: The above figures are for reference only, please refer to the actual units to determine their appearance.
If you haven't connected electronic equipment before, or you have been frustrated in the past, you may wish
to read this section. (Cables are not supplied)
Caution: Do not plug the TV in until you have finished connecting all of your equipment.
Connecting your TV
Front Controls
Power Indicator
Infrared Sensor
Power Switch
Front Panel
Volume Down
TV/AV Selection
Channel Up
Channel Down
Volume Up
MENU
Back Connections
AC Cord and Plug
IN
S-VIDEO
VIDEO
AUDIO MONO
Y
Cb
Cr
Antenna
Component Video Input
Audio Input
Video Input
S-VIDEO Input
IN
S-VIDEO
VIDEO
AUDIO
MONO
Y
Cb
Cr
ANT75
AV/TV MENU CH VOL
AV/TV MENU CH VOL
VIDEO
AUDIO/L
AUDIO/R
Lateral AV
Video Input
Audio Input (Right)
Audio Input (Left)