Hornet Car Security 563T - Manual (Page 30)

27 © 2 0 0 5 d i r e c t e d e l e c t r o n i c s — a l l r i g h t s r e s e r v e d
table of zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that have been installed.
ZZO ON NEE
(Number of
D DEEA ALLEER R--IIN NSSTTA ALLLLEED D
LED Flashes)
D DEESSCCR RIIP PTTIIO ON N O OP PTTIIO ON NSS
1 1
Trunk Pin
2 2
Instant trigger - a heavier impact
detected by the shock sensor
3 3
Door switch trigger
4 4
Instant trigger - for optional
sensors
5 5
Ignition trigger
6 6 Hood Pin
➜
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC
active