Husky 16628 - Manual (Page 3)

3
Nails every 12" (30 cm)
through Floor Panels into all
Floor Bond Boards and Floor
Joists
D
C
C
D
A
A A
F
D F
92-5/8"
96"
24"
(61 cm)
24"
(61 cm)
FLOOR PANEL ATTACHMENT:
C: Position a 48 x 92-5/8” Floor
Panel flush to the outside
edges of sides and back of
Floor Frame. Secure panel with
two 2” nails at outside corners
and one 2” nail at other
corners.
D: Position the other 48” x 92-5/8”
Floor Panel flush against
first panel and flush to edges of
Floor Frame. Secure panel with
two 2” nails at outside corners
and one 2” nail at each of other
corners.
With Floor Panels flush to
outside edges of Floor Frame,
nail with 2” nails every 12”
through Floor Panels into all
Floor Bond Boards &
and Floor Joists .
Note: Mark a line on the Floor Panel
over the center of each Floor
Joist @ 24” using a pencil and a
piece of lumber from the kit (or
use a chalk line) to make
nailing easier.
Your Floor is now complete.
Check to be sure it is properly
positioned and leveled to
ground before beginning
assembly of your Handy Home
Wooden Storage Building.
8X8 F L O O R K I T I N S T RU C T I O N S
CONTINUED
A
A
C
D F