Hitachi UC 18YG - Manual (Page 8)

English
8
APPLICATIONS
For charging the HITACHI batteries types FEB, EB7, EB9, EB12, EB14 and EB18 series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
⅜ The power source voltage is stated on the nameplate.
⅜ The cord is not damaged.
WARNING:
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Insert the plug of battery charger into the receptacle.
WARNING:
Do not use the electrical cord if damaged. Have it repaired immediately.
SPECIFICATIONS
Input power source Single phase: AC120V 60Hz
Approx. 30 minutes .......... EB712S, EB7S, FEB7S, EB714S,
EB912S, EB9S, FEB9S, EB914, EB914S,
EB1212S, EB12S, FEB12S, EB1214L,
Charging time
EB1214S, EB1412S, EB1414, EB1414S,
EB1812S, EB1814SL
Approx. 50 minutes .......... EB7B, EB9B, EB12B, EB1220BL,
EB14B, EB1820, EB1820L
Approx. 60 minutes .......... EB924, EB1224, EB1424, EB1824L
Charger
Charging voltage .............................. DC 7.2–18V
Charging current .............................. DC 2.6A
Weight 0.7 lbs (0.3kg)