Hoover S1223 - Manual (Page 24)

4. If belt is not broken, pull it off the
motor pulley.
5. Return cleaner to bottom side up.
Remove agitator and belt.
6. Slip agitator through new belt
(with lettering toward outside of
cleaner) and position belt in belt
guide. Lower end of belt into
opening in cleaner body; reposition
agitator.
7. Place the three tabs on bottom
plate into slots in front of cleaner
body. Snap bottom plate into place
over agitator. Turn agitator, making
sure the belt is not pinched
between agitator and cleaner body.
The belt must rotate freely inside
the belt guide. If agitator does not
turn, remove bottom plate and
reposition belt in belt guide.
21