Harbor Freight Tools GORDON 66691 - Manual (Page 3)

SKU 66691 For technical questions, please call 1-800-444-3353. Page 3
sPeCiFiCations
Rechargeable Battery
4V DC 2AH Sealed
Lead Acid (Included, Not
Replaceable).
Bulb
25W Halogen (H3 4V
25W)
AC/DC Adaptor
Input: 120VAC 60 Hz
(Included)
Adaptor Prongs 2-Prong, Non-Polorized
Cigarette Lighter
Adaptor
12V DC, Fuse: 2A 250V
(Included)
Light Output 1 Million Candle Power
Please Note: Spotlight will NOT operate
during charging.
unP aCking
When unpaing, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at the number shown on the
cover of this manual as soon as possible.
oPerating instruCtions
read the entire iMPortant
saFety inForMation section
at the beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
Charging with aC/dC adaptor:
Plug AC/DC Adaptor (21) into a 120V 1.
outlet.
Attach the end of the Adaptor cord to
2.
the Adaptor Cord Inlet, located on the
back of the Spot Light. See Figure 1.
The Charge Light Indicator will light 3.
up. When the Charge Light Indicator
goes out, the Spot Light is ready for
use. Unplug the Adaptor.
Charging with 12V Cigarette lighter
adaptor: Plug into any 12V DC outlet in a
Automobile, boat or RV, and then into the
Adaptor Plug Inlet located on the back of
the Spot Light. See Figure 1.
Figure 1
Charge light
indicator
Pistol
grip
adaptor Plug inlet
4. The Charge Light Indicator will light
up. When the Charge Light Indicator
goes out, the Spot Light is ready for
use. Unplug the Adaptor.
A fully charged Spot Light will give
5.
bright light for approximately 20 min-
utes.
note: spotlight will not operate
6.
during charging.
using the rechargeable spot light:
Hold the Spot Light using the Pistol 1.
Grip (4).
Squeeze the Switch (6) located on
2.
the Trigger (8). If you want the Spot
Light to stay on, push the Switch
Lock (5) in while squeezing the Trig-
Rev 10d