HP 240 - Manual (Page 2)

6
turn on your printer
1. Press the ON button on the top of the
printer.
2. Press the OK button. A calibration page
prints on the previously loaded index card.
On button
5
install the print cartridge
1. Open the print cartridge door.
2. Place the HP #57 tri-color print cartridge in the
print cartridge cradle with the copper contacts
facing toward the inside of the printer and the
ink nozzles facing down.
3. Push the print cartridge into the cradle until
you feel it snap into place.
4. Close the print cartridge door.
7
print your first photo
1. Place a few sheets of photo paper in the paper tray with the glossy side up and the tab closest to the
inside of the printer. Slide the paper underneath the output guide
2. Move the paper width guide to fit close to the left edge of the paper without bending the paper.
3. Insert a memory card that contains digital photos into the correct memory card slot.
Note: Push the memory card into the printer until it stops—it does not insert all the way into the printer.
The memory card light flashes while the printer reads the memory card.
4. When Select Layout: appears, press the OK button to select the 1 photo layout.
5. When the first photo stored on the memory card appears on the printer’s LCD screen, press the PRINT
button to print it.
4
remove the tape
1. Open the print cartridge package.
2. Pull the pink pull-tab to remove the clear
tape from the print cartridge.
?
www.hp.com/support
Do not touch or remove
the ink nozzles or the
copper contacts!
need more help?
Memory card light
Print button
Memory card slots
OK button
1 2 3
Print cartridge door
Printed in USA 05/03 v1.1.0 • Printed on recycled paper
© 2003 Hewlett-Packard Company
OK button