HP M417/M517 - Manual (Page 107)

107 Troubleshooting and Support
I have to
replace or
recharge the
batteries
frequently
(continued).
The NiMH
batteries you
are using were
recharged
incorrectly, or
have drained on
their own
because they
have not been
used lately.
NiMH batteries are not fully
charged when new, and they
discharge over time whether or
not they are installed in a
camera. Batteries that are new
or have not been charged
recently must be recharged to
reach full capacity (see
page 151).
Battery
chemistry type
is inappropriate
for the way the
camera is being
used.
See Performance per Battery
Type on page 148.
The camera
batteries will
not charge.
Rechargeable
batteries are not
inserted.
Install NiMH batteries. Lithium
and Alkaline batteries cannot
be recharged.
Batteries are
already
charged.
Battery charging will not start if
the NiMH batteries were
recently charged. Try charging
them again after they have
drained awhile.
The wrong AC
power adapter
is being used.
Use only the HP AC power
adapter approved for use with
this camera (see page 155).
Problem Possible Cause Solution