Symbology, Unpacking, Pipe connection – Harbor Freight Tools Pacific Hydrostar Portable Sprinkler Pump 6842 User Manual

Page 4

Advertising
background image

Page 4

For technical questions, please call 1-800-444-3353.

SKU 68421

Symbology

Double Insulated

Canadian Standards Association

Underwriters Laboratories, Inc.

v~

Volts Alternating Current

a

Amperes

n0 xxxx/min.

No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk

of Eye Injury. Wear ANSI-approved

safety goggles with side shields.

Read the manual before set-up and/

or use.

WARNING marking concerning Risk of

Hearing Loss.

Wear hearing protection.
WARNING marking concerning Risk

of Fire.

Do not cover ventilation ducts.

Keep flammable objects away.

WARNING marking concerning Risk of

Electric Shock.

Properly connect power cord to

appropriate outlet.

Specifications

Power Requirements

120 V~ / 60 Hz / 11.1 A

Maximum Flow

1150 GPH

Maximum Lift

154 FT.

Pressure

67 PSI

Motor

1-1/5 Horsepower Electric

Inlet and Outlet Diameter

1 IN. NPT

Cord Length

5 FT. 2 IN.

236418

JtS-441

unpacking

When unpacking, make sure that the item is intact

and undamaged. If any parts are missing or broken,

please call Harbor Freight Tools at 1-800-444-3353 as

soon as possible.

Set up

WaRnInG! This is NOT a submersible pump.

Do not immerse in water.

Pipe connection

The Pump uses 1" NPT piping (sold separately).

Purchase the necessary length of pipe, including any

needed fittings and bends. Mount the Pump as close to

the source of water as possible and within the range of

the rated Suction Lift. The connections must be airtight.

Wrap all threaded connections with PTFE tape (sold

separately).

1.

outlet

Priming

Plug

(23)

Inlet

cover (25)

Pump body (22)

Remove the Inlet and Outlet covers (25) from the

Pump.

2.

Attach the water source to the Inlet, using

appropriate methods. The Inlet hose or pipe must

be collapse-proof to properly withstand the suction

force.

3.

Install a foot valve and filter (sold separately) at the

bottom of the inlet.

4.

Attach the outlet connection to the Outlet. A

Y-fitting with dual valves (sold separately) is helpful

for priming the pump (see next section).

Advertising