Honeywell PCR11ELW - Manual (Page 6)

ALARM 2 setting
-In the ALARM 2 Display,
* Press and hold SET 2 for about 3 seconds: the alarm hour digits will
flash and alarm hour can be set by pressing UP [+] or DOWN [–] key.
* Press SET 2 again: the alarm minute digits will flash and minute
can be set by pressing UP [+] or DOWN [–] key.
* Press SET 2 for the third time, the alarm minute digits “04” will
flash to set snooze time interval. Press UP [+] or DOWN [–] key to
set the required time period.
* Press SET 2 again, the Alarm 2 time is set and the [ ] icon will
turn on.
Enable Alarm 1/Alarm 2:
*Press SET 1 to enable ALARM 1 with
[ ] icon to enabled.
*Press SET 2 to enable ALARM 2 with
[ ] icon to turned on.
1
2
2
SETTING 12 OR 24 HOUR TIME FORMAT
*Pressing "+" will display time in 12 or 24 hour format.
N.B.:1. If no key pressed within 30 seconds, the clock returns to the
Time / Temperature Display setting.
2. During any programming press and hold UP [+] or DOWN [–]
key for 2 seconds for faster scrolling through the digits.
Calendar
To change the weekday display from one language to another, press
and hold DOWN [–] key for 3 seconds - the display will show the
current language
To set weekday on another language, press & Hold DOWN key for
2 seconds.
SETTING ALARMS
ALARM 1 setting
-In the ALARM 1 Display:
* Press and hold SET 1 for about 3 seconds: the alarm hour digits will
flash and then hour can be set by pressing UP [+] or DOWN [–] key.
* Press SET 1 again: the alarm minute digits will flash and then minute
can be set by pressing UP [+] or DOWN [–] key.
* Press SET 1 the third time, and the alarm minute digits “04” will flash
to set snooze time interval. Press UP [+] or DOWN [–] key. key to set
the required time period.
* Press SET 1 again, the Alarm1 time is set and [ ] icon will be displayed. 1
DATE MONTH
1
PM
DATE MONTH
2