Husqvarna 61 - Manual (Page 34)

34
– English
61
3,8/61,5
1,9/48
1,3/34
2 500
12 000
2,9/ 8 300
Electrolux
ET
Champion
RCJ 7Y
0,020/0,5
Tillotson
HS 254B
1,6/0,75
3-6-9-12
0,95/0,45
Automatic
13,4/6,1
268
4,1/67
2,0/50
1,3/34
2 500
12 500
3,2/ 9 000
Electrolux
ET
Champion
RCJ 7Y
0,020/0,5
Tillotson
HS 260A
1,6/0,75
3-6-9-12
0,95/0,45
Automatic
13,7/6,2
61
113
115
102
4,7
7,6
15"/38
15"/38–20"/51
14"/36–19"/48
18,4
3/8"
0,058"/1,5
7
268
114
115
104
4,4
6,1
15"/38
15"/38–20"/51
14"/36–19"/48
20,0
3/8"
0,058"/1,5
7
Noise emissions
(see note 1)
Sound power level, measured
dB(A)
Sound power level, guaranteed
L
WA
dB(A)
Sound levels
(see note 2)
Equivalent sound pressure
level at operator’s ear,
measured according to relevant
international standards, dB(A)
Vibration levels
(see note 3)
Front handle m/s
2
Rear handle m/s 2
Chain/bar
Standard bar length,
inches/cm
Recommended bar lengths,
inches/cm
Usable cutting length,
inches/cm
Chain speed at max.
power, m/sec
Pitch, inches
Thickness of drive link, inch/mm
Number of teeth on drive
sprocket
Engine
Cylinder volume, cu.in/cm 3
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max.
speed, unloaded, rpm
Power, kW/ rpm
Ignition system
Manufacture
Type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication
system
Manufacturer
Carburettor type
Fuel capacity, US pint/litre
Oil pump capacity at 8500 rpm,
ml/min
Oil capacity, US pint/litre
Type of oil pump
Weight
Without bar and chain, Lbs/kg
TECHNICAL DATA
Bar and chain combinations
The following combinations are CE approved.
Bar Chain
Length, Pitch, Max.
inches inches tip radius
15 3/8 11T Husqvarna H42
16 3/8 11T Husqvarna H42
18 3/8 11T Husqvarna H42
20 3/8 11T Husqvarna H42
1
5
L
Type Inch Inch/mm Inch/mm Angle Angle Angle Inch/mm Inch/cm: dl
H42 3/8" 0,058"/1,5 7/32" /5,5 60° 25° 10° 0,025"/0,65 15"/38:56 16"/41:60
18"/46:68 20"/51:72
Note 1: Noise emissions in the environment measured as sound
power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO
7182, is calculated as the time-weighted energy total for sound
pressure levels under various working conditions with the
following time distribution: 1/3 idling, 1/3 max. load, 1/3 max.
speed.
Note 3: Equivalent vibration level, according to ISO 7505, is
calculated as the time-weighted energy total for vibration levels
under various working conditions with the following time
distribution: 1/3 idling, 1/3 max. load, 1/3 max. speed.
´®z+R$J¶61¨