Herrmidifier Co G-100ES - Manual (Page 4)

2
Specifications
To improve the efficiency of your humidifier, and to reduce the possibility of a health hazard, it
is recommended that you take the following precautions:
• Follow the manufacturer’s recommended cleaning and maintenance instructions.
• The amount of minerals and other impurities in a water source can vary greatly, therefore the
frequency of cleaning the humidifier also varies.
• During the heating season, check for film or scale build up on the humidifier, evaporator pad,
and all moving parts on a monthly basis and establish a proper cleaning schedule.
• Do not allow film or scale to build up on the unit, evaporator pad, or any moving part which
will reduce the efficiency of the humidifier.
• At the end of the winter humidification season, drain and thoroughly clean your humidifier
as part of the summer shut down. Be sure to install a new evaporator pad at the beginning
of the heating season before starting the humidifier.
Like your heating system and air conditioning unit, periodic maintenance and cleaning are
required to ensure the safe and efficient operation of your humidifier.
Model
Type of Unit
Duct mounting
GPD @ 140°
GPD @ 120°
GPD @ 100°
Solenoid valve voltage
Motor
Unit W x D x H
Duct Opening W x H
Shipping Weight
Standard Equipment
Features
G100ES
Power flow through
Supply
24.0
19.0
14.5
24VAC
1/20 HP - 120VAC (220-240VAC International)
13” x 11 1/2” x 18 3/4”
12 1/4” x 15 1/4”
18 lbs
Wall/Duct Mount Humidistat
Self Piercing Saddle Valve
120VAC (220-240VAC International) to 24V Transformer
Power Cord with 3-Prong Plug
Brass solenoid valve assembly
Removable motor cap allows easy access to motor for
servicing or maintenance
Cleanable & replaceable internal water filter protects
the solenoid valve
Attractive design and finish - neutral beige color
2” evaporator pad for greater surface area
Specifications